|
Press
Ctrl_D to bookmark this site
















| |
Out of Print and used Steam
Engineering Books
|
 |
Click picture to enlarge
 |
|
$64.95
|
|
|
SteamPower Engineering
Gebhardt
Hard Cover 1008 Pages, Six Edition, copyright
1928 revision. Good condition has writing pervious
engineer on first page only. Only 52,000 Printed. |
$64.95
|
 |
- Shafting, Pulleys,
Belting, Rope Transmission and Shaft
Governors by Hubert E. Collins. First
Edition, Seventh Impression. 1908.
- Electrical Catechism,
An Introductory Treatise on Electricity
and Its Uses by Geo. D. Shepardson,
M.E. Second Edition, Seventh
Impression. 1901.
- Boilers, Pipes and
Piping Pumps by Hubert E. Collins.
First Edition, Seventh Impression.
1908.
- Power Catechism,
Correct Answers to Direct Questions
Covering the Main Principles of Steam
Engineering and the Transmission of
Power. Compiled from the Regular
Monthly Issues of "Power". Seventh
Impression.
- Valve Setting, Simple
Methods of Setting the Plain Slide
Valve, Meyer Cut Off, Corliss, and
Poppet Types by Hubert E. Collins.
First Edition, Seventh Impression.
1908.
- Steam Turbines, A
Book of Instruction for the Adjustment
and Operation of the Principal Types of
this Class of Prime Movers by Hubert E.
Collins. First Edition, Seventh
Impression. 1909.
- Elementary Mechanical
Refrigeration, A Simple and Non
Technical Treatise by Fred E. Matthews,
B.S., M E., E.E. First Edition, Seventh
Impression. 1912.
|
|
|
|
|
The Power Plant Library
Series (complete set) |
|
|
Super condition |
$129.95 Complete Set
|
|
 |
Click picture to enlarge
 |
Click picture to enlarge
 |
|
Power Plant Series
Practical Heat 1 & 2 Terrel Croft
These
are the Power Plant Series Practical Heat Parts I and II by Terrell
Croft. Second Edition, Fourth Impression. Both are hardcover, no
dust jacket. Covers have some minor wear, there is a name stamped on
the inside covers, otherwise inside of books are in good condition |
$39.95
|
|
Sold out |
|
 |
|
By Terrell Croft, editor
Revised by D. J. Duffin
Volume 1
plastic comb spine
drawings - 583 pages
good condition w/minor wear
McGraw Hill |
|
|
|
|
|
Steam Power Plant Auxiliaries & Accessories Volume 1 & 2 |
$39.95
|
| Sold Out |
 |
$39.95
|
|
Marks,
Mechanical Engineers' Handbook 6th Ed6th Edition
1st Printing of a monster
book...published in 1958 by McGraw-Hill edited by Theodore
Baumeister. Over 100 pages....very nice condition...clean, light use
and bumping on the corners. Edges are showing some tanning. |
|
|
1 in stock |
|
 |
$29.95
|
| Cover has minor wear. Pages are clean
(name in front) and intact. Written by John R Allen and Joseph A
Bursley. Chapters: Heat, Elementary Thermodynamics, Properties of
Steam, Calorimeters and Mechanical Mixtures, Fuels and Combustion,
Boilers, Boiler Auxiliaries, Steam Engines, Testing of Steam
Engines, Compound Engines, Valve Gears, Governors, Steam Turbines,
Condensers, Internal Combustion Engine, Fuels and Fuel Systems,
Auxiliary Systems, Rating Performance, and Economy of Heat Engines.
McGraw-Hill, 1931, fourth edition. Some illustrations. |
|
Heat Engines by Allen &
Bursley |
1 in stock |
 |
$34.95
|
| Balancing theory and practice, Steam
Plant Operation provides common power plant calculations such as
plant heat rates; efficiency; pump flow and power requirements;
combustion processes; and plant emission collection efficiency.
Readers will also find valuable content on the approved methods of
operating equipment found in power plants, making this an unmatched
reference that will deliver value for years. |
|
STEAM PLANT
OPERATION by Everett B. Woodruff |
|
More books updated shortly

|